Shop Sprache/Language

flaggedeutschland.jpg flaggeengland.jpg

This shop has moved to a new domain. Please, visit our new shop page for placing an order.

New shop domain

This shop has moved to a new domain. Please, visit our new shop page for price information, delivery time or for placing an order.
Art.No.:

Nikon strip film holder with glass FH-869G

20 cm long glass holder for Nikon LS-8000, LS-9000

 
Delivery time: 
 
Please visit our new shop for details

Nikon strip film holder with glass FH-869G

The FH-869G is a universal film holder with a about 20 cm long glass plate. On this glass plate medium format films, 35mm panorama films and all other film material with a size of up to 60x90mm can be locked into position. Thus the holder with glass is ideal for film pieces, 16mm films and other special film formats.
 
4 frames of 4.5x6 cm sized medium formats, 3 frames sized 6x6cm and 2 frames sized 6x7, 6x8 or 6x9cm as well as two 35mm panorama images can be inserted and scanned at once.
 
As an alternative there is the significantly cheaper Nikon glass holder FH-869GR with a rotatable glass plate.
 

Compatible scanner models

  • Nikon Super Coolscan 8000 ED (LS-8000 ED)
  • Nikon Super Coolscan 9000 ED (LS-9000 ED)

Scope of delivery

  • Original Nikon film holder with glass FH-869G
  • Maskers for medium formats 6 x 4.5, 6 x 6, 6 x 7, 6 x 8, 6 x 9
  • Removeable attachment strips
 
Recommended accessories
 
During the period of use more and more dust and dirt sets on the contact surface and the corners of a film holder. Consequently dust gets on the film material and into the scanner. Hence the film holder should be cleaned again and again. The easiest way is simply brushing the film holder with an anti static brush, which not only removes the dust but also removes electric charges. Discharging is important because electric charge adducts dust as is generally known. Kinetronics anti static brushes are available in different sizes.
 
 
When working with film strips it can often happen that you accidentally touch the emulsion side of the film. The damage often is irreparable. You can avoid damages to the film material and comfortably insert film strips into the scanner or film holder by wearing fine cotton gloves.
 
 
 
Anti-dust spray is used to clean film material - no matter if it's mounted slides or film strips - by removing dust and fluffs with a flimsy current of air without touching the film material at all. There is no better, more comfortable and more efficient way to clean your film material.
 
 
 
For working with single negatives or positives we highly recommend using tweezers, because otherwise you run the risk of touching and damaging the film.
 
 
Your cart: 0 Products 0,00
 
 
 
 
Your shopping cart is still empty.

Drag products here or use the corresponding buttons [Buy now] in order to fill your shopping cart.