Advanced IT-8 target for creating individual ICC profiles of scanners for professional color management. LaserSoft Imaging has a very high quality IT8 target production. Large manufacturers use LaserSoft Imaging's targets for their worldwide production and are impressed by the high quality.
This IT8 target is a transparency Fuji film. With a size of 6x7 cm it is suitable for calibrate medium format film scanners and flat bed scanners with
transparency unit and medium format film holder.
The Fuji target is particularly suitable for profiling Fuji films and Agfa films.
As you can read in our review the extended targets don't have any advantages compared to the standard targets. That's why we recommend the standard target as a cheaper alternative.
Benefits of LaserSoft Imaging IT-8 targets
- Higher precision than other manufacturers because smaller units are produced and calibrated
- Significant higher dynamic range
- A barcode on the target enables automatic detection of the according reference file (LaserSoft Imaging patent)
Scope of delivery
- LaserSoft Imaging enhanced color calibration target IT8 transparency 6x7 Fuji
Before you perform a colour calibration with an IT-8 target you should clean the target carefully in order to avoid fault measurements due to dust. For cleaning IT-8 targets we recommend an anti-static brush from Kinetronics. With an anti-static brush you can make a careful and professional cleaning and you remove static loads from the film material, and you avoid, respectively, that it charges up with static loads during the cleaning process.