Corona-Info: Actually you can still order in our online shop. Our online shop is updated several times a day, also at the week-end. All arctiles, which are marked as in stock can be shipped immediately. Please, note, that the delivery may take longer than stated. You can reach us per e-mail any time; our telephone is not available permanantly.
Art.No.:
Kodak IT-8 Target Reflective 5x7" - Monaco Systems
IT-8 Target for generating individual ICC profiles of scanners for professional colour management. This Target is a Reflective 5x10inch Target which can be used to calibrate Flatbed Scanners. Because of the size this Target can not be used for Filmscanners.
You can find detailed information about IT-8 colour calibration and colour management on our colour management website.
Scope of delivery
Kodak IT-8 Target Reflective 5x7" - Monaco Systems
Before you perform a colour calibration with an IT-8 target you should clean the target carefully in order to avoid fault measurements due to dust. For cleaning IT-8 targets we recommend an anti-static brush from Kinetronics. With an anti-static brush you can make a careful and professional cleaning and you remove static loads from the film material, and you avoid, respectively, that it charges up with static loads during the cleaning process.
x-rite i1 Scanner is a software, which can produce an input profile for a scanner with the help of an IT-8 target. Therefore the IT-8 target will be scanned with a scan software and read by the i1 scanner software. By comparing the read colour fields with those of a reference file a scanner profile will be computed and saved. This scanner profile can then be used by different scan programs (EpsonScan, Canon-ScanGear, SilverFast, Vuescan) as an input profile.
Kinetronics Anti-static brush for cleaning IT-8 targets
x-rite i1 Scanner - Software for scanner calibration